Arduino Mega – TFT Megashield v1.1 met TFT320QVT
9 berichten
• Pagina 1 van 1
Arduino Mega – TFT Megashield v1.1 met TFT320QVT
HELP !
Voorbeeldsketch gezocht voor:
Arduino Mega – TFT Megashield v1.1 met TFT320QVT
De voorbeeldsketches werken geen van alle. (in 1.0.6)
Krijg wel wat licht in het scherm, maar voor de rest NIETS.
Wie kan en wil me een beetje helpen. (ben pas bezig met Arduino)
Voorbeeldsketch gezocht voor:
Arduino Mega – TFT Megashield v1.1 met TFT320QVT
De voorbeeldsketches werken geen van alle. (in 1.0.6)
Krijg wel wat licht in het scherm, maar voor de rest NIETS.
Wie kan en wil me een beetje helpen. (ben pas bezig met Arduino)
Advertisement
- nicoverduin
- Berichten: 5043
- Geregistreerd: 13 Mei 2013, 20:57
- Woonplaats: Heemskerk
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
Laat eens een voorbeeld sketch hier zien die je hebt gebruikt? Klinkt als een verkeerde pin definitie.
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
Lees dit eens door voor het mooi formatteren en beter leesbaar maken van de code
viewtopic.php?f=16&t=903
Hier een van de vele voorbeeld bestanden die niet werkt.
Deze stopt bij :
UTFT myGLCD(ITDB32S,38,39,40,41);
cpp code
viewtopic.php?f=16&t=903
Hier een van de vele voorbeeld bestanden die niet werkt.
Deze stopt bij :
UTFT myGLCD(ITDB32S,38,39,40,41);
cpp code
// UTFT_Bitmap
// Copyright (C)2015 Rinky-Dink Electronics, Henning Karlsen. All right reserved
// web: http://www.RinkyDinkElectronics.com/
//
// This program is a demo of the drawBitmap()-function.
//
// This demo was made to work on the 320x240 modules.
// Any other size displays may cause strange behaviour.
//
// This program requires the UTFT library.
//
#include <UTFT.h>
// Declare which fonts we will be using
extern uint8_t SmallFont[];
// Set the pins to the correct ones for your development shield
// ------------------------------------------------------------
// Standard Arduino Mega/Due shield : <display model>,38,39,40,41
// CTE TFT LCD/SD Shield for Arduino Due : <display model>,25,26,27,28
// Teensy 3.x TFT Test Board : <display model>,23,22, 3, 4
// ElecHouse TFT LCD/SD Shield for Arduino Due : <display model>,22,23,31,33
//
// Remember to change the model parameter to suit your display module!
UTFT myGLCD(ITDB32S,38,39,40,41);
extern unsigned short info[0x400];
extern unsigned short icon[0x400];
extern unsigned short tux[0x400];
void setup()
{
myGLCD.InitLCD();
myGLCD.setFont(SmallFont);
}
void loop()
{
myGLCD.fillScr(255, 255, 255);
myGLCD.setColor(255, 255, 255);
myGLCD.print(" *** A 10 by 7 grid of a 32x32 icon *** ", CENTER, 228);
for (int x=0; x<10; x++)
for (int y=0; y<7; y++)
myGLCD.drawBitmap (x*32, y*32, 32, 32, info);
delay(5000);
myGLCD.fillScr(255, 255, 255);
myGLCD.setColor(255, 255, 255);
myGLCD.print(" Two different icons in scale 1 to 4 ", CENTER, 228);
int x=0;
for (int s=0; s<4; s++)
{
x+=(s*32);
myGLCD.drawBitmap (x, 0, 32, 32, tux, s+1);
}
x=0;
for (int s=4; s>0; s--)
{
myGLCD.drawBitmap (x, 224-(s*32), 32, 32, icon, s);
x+=(s*32);
}
delay(5000);
}
- nicoverduin
- Berichten: 5043
- Geregistreerd: 13 Mei 2013, 20:57
- Woonplaats: Heemskerk
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
Er zijn helaas meerdere mogelijkheden. Kennelijk wisselen die TFT drivers nog wel eens. Dus waar nu staat ITDB32S kan het een andere driver worden. Dus om te begnnen, graag de link naar het product waar je hem gekocht hebt.
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
je zegt dat die daarbij stopt,
wat is dan de foutmelding die het programma aangeeft?
wat is dan de foutmelding die het programma aangeeft?
Met vriendelijke groet Arjan
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
De foutmelding is:
UTFT does not name a type.
Hier wat gegevens:
HY-TFT320 is a 3.2 inch TFT LCD Screen module, 320*240 (resolution), 65K color, 40pins interface ,
not just a LCD breakout, but include the Touch screen, SD card. So it’s a powerful extension module
for your project.
This Screen includes a controller SSD1289, it’s 16bit data interface, easy to drive by many MCU like
STM32 ,AVR and 8051.HY-TFT320 is designed with a touch controller in it . The touch IC is XPT2046 ,
and touch interface is included in the 40 pins breakout. Another useful extension in this module is the
SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins
breakout.
Application Ideas
Digital Photo Frame (DPF)
Video terminals
Instrumentation
GPS
Game consoles
Video phones and Portable VCD, DVD
Specification:
3.2" Color TFT LCD
320 x 240 Resolution
65,536 Colors (16 Bit)
Powerful 16 Bit Microcontroller(SSD1289)
Built-in video RAM buffer
Integrated Resistive Touchscreen
Integrated SD card
5V Operating Volta
Note: The TFT controller model needs to be declared in the initializing statement. ITDB02
myGLCD(38,39,40,41) needs to be modified as myGLCD(38,39,40,41,ITDB32S) when using Arduino
Mega2560.ITDB02 myGLCD(19,18,17,16,ITDB32S) needs to be commented when using Aduino UNO.
Otherwise it just show a blank screen. In practice, RS, WR, CS, RSET can be connected to any free
pin. But the pin number must be in accord with myGLCD(RS,WR,CS,RST).
UTFT does not name a type.
Hier wat gegevens:
HY-TFT320 is a 3.2 inch TFT LCD Screen module, 320*240 (resolution), 65K color, 40pins interface ,
not just a LCD breakout, but include the Touch screen, SD card. So it’s a powerful extension module
for your project.
This Screen includes a controller SSD1289, it’s 16bit data interface, easy to drive by many MCU like
STM32 ,AVR and 8051.HY-TFT320 is designed with a touch controller in it . The touch IC is XPT2046 ,
and touch interface is included in the 40 pins breakout. Another useful extension in this module is the
SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins
breakout.
Application Ideas
Digital Photo Frame (DPF)
Video terminals
Instrumentation
GPS
Game consoles
Video phones and Portable VCD, DVD
Specification:
3.2" Color TFT LCD
320 x 240 Resolution
65,536 Colors (16 Bit)
Powerful 16 Bit Microcontroller(SSD1289)
Built-in video RAM buffer
Integrated Resistive Touchscreen
Integrated SD card
5V Operating Volta
Note: The TFT controller model needs to be declared in the initializing statement. ITDB02
myGLCD(38,39,40,41) needs to be modified as myGLCD(38,39,40,41,ITDB32S) when using Arduino
Mega2560.ITDB02 myGLCD(19,18,17,16,ITDB32S) needs to be commented when using Aduino UNO.
Otherwise it just show a blank screen. In practice, RS, WR, CS, RSET can be connected to any free
pin. But the pin number must be in accord with myGLCD(RS,WR,CS,RST).
- nicoverduin
- Berichten: 5043
- Geregistreerd: 13 Mei 2013, 20:57
- Woonplaats: Heemskerk
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
als jij een compiler waarschuwing krijg, dan is er nog niets geupload naar de Mega. Dan klopt je library niet. Heb je die wel in je applicatie geimporteerd?
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
utft moet staan in .....arduino/library/utft/utft.h
paul deelen
shooter@home.nl
shooter@home.nl
Re: Arduino Mega – TFT Megashield v1.1 met TFT320QVT
Ben er al uit.
Arduino opnieuw geinstalleerd met de bijbehorende displaydriver en alles werkt.
Bedankt voor jullie reacties.
Arduino opnieuw geinstalleerd met de bijbehorende displaydriver en alles werkt.
Bedankt voor jullie reacties.
9 berichten
• Pagina 1 van 1
Wie is er online?
Gebruikers in dit forum: Geen geregistreerde gebruikers en 10 gasten