Bekijk onderwerp - Web Server sketch met Ethernet Shield

door **ankeveen** » 22 Nov 2012, 01:32

Wat doe ik verkeerd?

Zou iemand mij op weg kunnen of willen helpen met een Arduino Mega 2560 met Arduino Ethernet Shield , dat wil ik vast uitproberen zonder Nodo Shield, ik krijg het niet aan de praat ,

ik kan deze Web Server sketch uploaden, op mijn Arduino mega met Ethernet Shield

"Google Chrome kan geen verbinding maken met 192.168.1.177"
en ik kan hem ook niet pingen.

Misschien is de Ethernet Shield niet goed, weet iemand hoe ik dat kan controleren de netwerk leds branden en op de Shied een rode en drie groene en als ik een sketch upload knipperd de groen led bij aref.

Hans

/*
  Web Server

A simple web server that shows the value of the analog input pins.
using an Arduino Wiznet Ethernet shield.

Circuit:
* Ethernet shield attached to pins 10, 11, 12, 13
* Analog inputs attached to pins A0 through A5 (optional)

created 18 Dec 2009
by David A. Mellis
modified 9 Apr 2012
by Tom Igoe

*/

#include <SPI.h>
#include <Ethernet.h>

// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = {
  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(192,168,1, 177);

// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(8080);

void setup() {
// Open serial communications and wait for port to open:
  Serial.begin(9600);
   while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }

  // start the Ethernet connection and the server:
  Ethernet.begin(mac, ip);
  server.begin();
  Serial.print("server is at ");
  Serial.println(Ethernet.localIP());
}

void loop() {
  // listen for incoming clients
  EthernetClient client = server.available();
  if (client) {
    Serial.println("new client");
    // an http request ends with a blank line
    boolean currentLineIsBlank = true;
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();
        Serial.write(c);
        // if you've gotten to the end of the line (received a newline
        // character) and the line is blank, the http request has ended,
        // so you can send a reply
        if (c == '\n' && currentLineIsBlank) {
          // send a standard http response header
          client.println("HTTP/1.1 200 OK");
          client.println("Content-Type: text/html");
          client.println("Connnection: close");
          client.println();
          client.println("<!DOCTYPE HTML>");
          client.println("<html>");
                    // add a meta refresh tag, so the browser pulls again every 5 seconds:
          client.println("<meta http-equiv=\"refresh\" content=\"5\">");
          // output the value of each analog input pin
          for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
            int sensorReading = analogRead(analogChannel);
            client.print("analog input ");
            client.print(analogChannel);
            client.print(" is ");
            client.print(sensorReading);
            client.println("<br />");
          }
          client.println("</html>");
          break;
        }
        if (c == '\n') {
          // you're starting a new line
          currentLineIsBlank = true;
        }
        else if (c != '\r') {
          // you've gotten a character on the current line
          currentLineIsBlank = false;
        }
      }
    }
    // give the web browser time to receive the data
    delay(1);
    // close the connection:
    client.stop();
    Serial.println("client disonnected");
  }
}

Bekijk onderwerp - Web Server sketch met Ethernet Shield

Het Nederlandstalig Arduino forum

Web Server sketch met Ethernet Shield

Web Server sketch met Ethernet Shield

Advertisement

Re: Web Server sketch met Ethernet Shield

Re: Web Server sketch met Ethernet Shield

Re: Web Server sketch met Ethernet Shield

Wie is er online?